Power on the SBC to login and execute the first boot procedure. SD card from the PC and insert it into your SBC device, preparing to boot for the first time. In the same file dietpi-wifi.txt, set aWIFI_KEY to the password of your WiFi network.Open the file dietpi-wifi.txt and set aWIFI_SSID to the name of your WiFi network.

Find AUTO_SETUP_NET_WIFI_ENABLED and set to value 1. To setup the WiFi, open the SD card folder, and update next two files using a text editor of your choice: This process may take a while.Ĭlick here if you want to use a WiFi connection Once you have confirmed all the details are correct, proceed to flash the SD card. The flash procedure will wipe the drive clean, so if you choose the wrong one, you may risk losing data. On Debian and Ubuntu-based systems, open a terminal and type: Linux users will need to download and install p7zip (the terminal version of 7zip). Both are free of charge and have been tested to unzip the image correctly. It is a 7z archive format so you will need to install either 7zip for Windows or The Unarchiver (Macintosh). Unzip the downloaded file to a local folder. The disk image will be downloaded locally. Open, select your SBC and click on Download. Download and extract the DietPi disk image ¶ Note: Following this guide you could run the installation directly from a console via keyboard and screen, via SSH client or serial console.

An SD card, USB flash drive or eMMC of at least 4 GiB size, and a way to write it.

A Raspberry Pi, Odroid or other SBC - open the list of all supported SBC.

To follow this tutorial, you will need the next hardware list: The low cost in combination with the power and hardware flexibility makes these SBCs optimal for embedded systems, like e.g. Single board computers (SBCs) based on the well known Raspberry PI ARM based architecture gained more and more friends in the last years. Download and extract the DietPi disk image Installation Installation Table of contents.

Ventoy raspberry pi